• WA +61 8 9472 0122
  • NSW +61 2 9998 6614
  • VIC +61 4 7701 7517
  • QLD +61 7 5657 9467

Flexim FLUXUS CA – Compressed Air

compressed air flow meter Flexim Fluxus CA-G704
Ask For a Quote
Download Pdf

Flexim FLUXUS CA – Compressed Air

Compressed air provides numerous advantages to site facilities in terms of efficiencies provided with this high-energy medium.   In a world where the cost of energy resources is on the rise, more facilities are looking to reduce operating costs through monitoring resource use.  The new FLEXIM FLUXUS CA – Compressed Air Flow meter offers the most accurate and technically advanced ultrasonic flow meter for compressed air and gases such as Nitrogen, Oxygen and Argon.

The FLEXIM FLUXUS CA – Compressed Air Flow Meter provides precise flow and volume  measurements, identifying leaks and consumption across the site.   To further enhance the capabilities of the system, optional temperature modules may be included to allow for Thermal Energy measurement across a heat exchanger.

Portable and Permanent Compressed Air Flow Meter options

The system is available in both portable and permanent models, ideally suited to carrying out energy audits, testing and verification of existing meters, balancing the plant networks, and monitoring compressor efficiency.

Using state-of-the-art technology, the non-invasive FLUXUS CA ultrasonic flowmeter series, this system requires no maintenance as it is completely free of wear-and-tear.  As it clamps onto the outside of the pipes, no pipe modification is required, there is no risk of secondary contamination and no risk of creating a leak through installation.

The system is suitable for low flow and low pressure applications, and can be used on pipes as small as DN15


  • Non-Invasive
  • No risk of secondary contamination
  • No cutting into pipe
  • Maintenance-free
  • High and Low Pressure applications
  • Works on pipes from DN15 to DN 250
  • Measure Flow Rate, Mass Flow and Flow Velocity



  • Energy Audits  (ISO50001 and EN16247)
  • Major project cost analysis – consumption metering
  • Flow meter verification
  • Leak detection
  • Network balancing
  • Compressor efficiency monitoring
  • Suitable for Compressed Air, Nitrogen, Oxygen and Argon


Both the permanent or portable meters are also available as ATEX / IECEx  Zone 2 or FM Class I, Div. 2 approved variants