• WA +61 8 9472 0122
  • NSW +61 2 9998 6614
  • VIC +61 4 7701 7517
  • QLD +61 7 5657 9467

Clamp On Ultrasonic Flow Meter – Zone 1

Clamp-on Flow Meter
Ask For a Quote
Download Pdf

Clamp On Ultrasonic Flow Meter – Zone 1

Clamp On Ultrasonic Flow Meter – The FLUXUS ADM 8027 Zone 1 ultrasonic flow meter for hazardous areas.

The FLUXUS ADM 8027 clamp on ultrasonic flow meter is FLEXIM’s permanent flow meter for explosion hazard environments, being ATEX approved for usage in zones 1 and 2. With its rugged, flameproof and water-tight field-enclosure, the clamp on ultrasonic flow meter – which can easily be operated by a magnetic pen without having to open the housing – is especially designed for its usage in rough industrial environments such as in Chemical and Petrochemical plants or Refineries.

The FLUXUS ADM 8027 clamp on ultrasonic flow meter allows for an inherently bi-directional flow measurement of volumetric and mass flow rates of nearly any liquid media – ranging form crude oil to refined products – and can be equipped with various outputs for a sophisticated process control. As the ultrasonic transducers are mounted on the outside of the pipe wall, enclosed in the rugged stainless steel VARIOFIX mounting fixtures and connected to the transmitter through steel armored cables, the system does not suffer from wear, tear or clogging and can’t be a risk for leaks.

Due to its matched and paired transducers as well as the internal temperature compensation (compliant to ANSI/ASME regulations), the measurement system is drift free and zero stable. Moreover, as the transducers calibration data is automatically loaded by connecting the transducer to the transmitter, set-up times are significantly reduced. As of its exceptional dual-uP technology, the high number of measuring cycles per second and the adaptive signal processing, the FLUXUS®flow meter produces stable and reliable measuring results even under the most difficult conditions.

The FLUXUS ADM 8027 clamp on ultrasonic flow meter can be applied at inner pipe diameters ranging from 10mm up to 6500mm (no limitations on pipe wall thickness or material) and media temperatures from –160°C up to 400°C (by usage of the high temperature mounting fixture WaveInjector).

With up to two measurement channels, the FLUXUS ADM 8027 flow meter can also be applied to difficult measurement points with non-ideal flow profiles. Even liquid streams with a high content of solids or gas bubbles are not a problem due to the innovative HybridTrek mode and the unique signal processing implemented into the flow computer.